Accessories & spare parts

Hadley Snow Cap, or Shield. 195mm diameter. Suitable for Hadley air horns type H00868. Polished Stainles Steel.

Hadley matte black snow cover, or shield. H00928BLCK, 195mm diameter. Suitable for the matte black Hadley horns H00894BCE or the chrome H00868ECE.

Hadley Snow Cap, or Shield. 175mm diameter. Suitable for Hadley air horns type H00861 and E-tones H09318AC, H09321AC, H09324AC. Polished Stainless Steel.

Hadley matte black snow shield H00929BLCK, 175mm diameter. Suitable for Hadley horns H00861ECE with a length of 62 cm.

Hadley Snow Cap, or Shield. 148mm diameter. Suitable for Hadley air horns type H00885 and H00886. Polished Stainless Steel.

Hadley Snow Cap, or Shield. 105mm diameter. Suitable for Hadley air horns type "Bully". Polished Stainless Steel.

Hadley diaphragm kit. Replacement set for your Hadley diaphragm, or membrane. Set includes also new rubbers, nuts and bolts and new "torx" screws to fasten the back of the membrane housing.

Electronic valve with solenoid coil, normally closed, 6mm in- and output, suitable for both 12v and 24v. up to 12 bar pressure

Hadley Air horn support for the 95cm long 868 truck horns. The large air horn support for Hadley (or other) air horns.

Hadley regular air horn support for truck horns. This regular horn support is mostly used for the H00856 and H00855, as well as the rectangular Ambassador- and aluminium Hadley truck horns.

Hadley Medium air horn support for truck horns. This horn support is mostly used for the H00861 and E-tone horns.

A complete 12v Air set. Can produce up to 115 psi/8 bar of air pressure. Suitable for all horns that normally require air on board. All pneumatic parts are included (not shown in pic)

Normally closed electro valve 12 and/or 24v DC. Inlet 3/8" tubing. Outlet 1/4" tubing. Working pressure 0-10 bar.

Hadley code: H00977HB

Hadley Code: H00550A

Hadley electronic valve for mounting on air tank. Special 12v valve for Hadley air tank. The H00550B (valve) is specially designed for mounting on the H00751N (Hadley air tank).

Hadley 24v compressor Hadley Code: H00851D

Pull valve with cord. Valve with connection for 6mm tube. Supplied with cord and compression fittings for 6mm tube. Male thread on couplings is 1/8 BSPP (gas).

Special service set for Hadley Bully horns. The set contains among other things two membranes (Ø 62 mm) to exchange for a better sound of your Bully horns.